Kay Pee Corporation
Kay Pee Corporation
Dabholi, Surat, Gujarat
SEND SMS
SEND EMAIL

Distribution Transformer

Distribution Transformer is an electrical isolation transformer which convert high-voltage electricity to lower voltage levels acceptable for use in homes and business. A distribution transformer's function is straightforward: to step down the voltage and provide isolation between primary and secondary. Electrical energy is passed through distribution transformers to reduce high-distribution voltage levels down to end-use levels. Nearly all energy passes through at least one distribution transformer before being consumed by an end-use appliance, motor, or other piece of equipment. Distribution Transformers are found in all sectors of the economy: residential, commercial, and industrial.
Distribution transformers are generally categorized in several ways:

  • type of insulation: liquid-immersed or dry-type
  • number of phases: single-phase or three-phase
  • voltage level (for dry-type): low or medium

Distribution Transformer

Distribution Transformer
  • Distribution Transformer
  • Distribution Transformer
  • Distribution Transformer
Get Best Quote
Approx. Price: Rs 3.35 Lakh / PieceGet Latest Price

Product Details:

Vector GroupAs Per Costumer Requirement
Rated KVAKVA Capacity As Per requirement (250 KVA To 2500 KVA)
TapingAs Per Costumer Requirement( Generally +5% To -5%)
ImpedanceAs Per BIS
No Load LossesAs Per Costumer Requirement
Full Load LossesAs per BIS Lavel
Load Losses At Half LoadAs Per BIS Lavel
No load CurrentLess Then 3 Percentage
StandardIS 1180
No Of PhaseThree
Nominal Voltage11 KV / 22 KV / 33 KV
Secondary VoltageAs Per Costumer Requirement (Generally 433 Voltage)
InstalatonIndoor / Outdoor
Type Of Cooling Oil Cooled
Orientation Of HV And LVGeneral 180 Degree And If Required 90 Degree
Temprature rise Oil And Winding50/55 degree

KAY PEE offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. KAY PEE 's liquid-filled transformers are manufactured in accordance with the most demanding industry and international standards. Transformers can be used for indoor or outdoor applications and can be provided with off-load and on-load tap changers.

The transformer are manufactured in accordance with IS 2026/1977, IS 1180/2016, IEC 60076 or as per customer’s custom requirement.

The transformers will be suitable for outdoor installation with three phase, 50Hz, 11 kV system in which the neutral is effectively earthed and theyshould be suitable for service with fluctuations in supply voltage up to plus 12.5% to minus 12.5%.


Range :
The standard ratings shall be 250, 315, 400, 500, 630, 800, 1000, 1250, 1500, 1600, 2000 and 2500 KVA for 11 kV distribution transformers.


Vector Group
: As percustomer’s custom requirement.

Core :
The core shall be stack / wound type of high grade cold rolled grain oriented annealed steel lamination having low loss and good grain properties, coated with hot oil proof insulation, bolted together and to the frames firmly to prevent vibration or noise.

Core Test
: The preliminary core loss test will be conducted before passing to the assembly stage.

Winding :
HV and LV windings shall be wound from Super Enamel covered /Double Paper covered, aluminum /copper conductor/ foil.

Tapings :
For ratings higher than 250 kVA, tapping shall be provided if required by the purchaser on the higher voltage winding for variation of HV voltage within range of (+) 5.0 % to (-)15.0 % in steps of 2.5%.

OIL :
The insulating oil shall comply with the requirements of IS 335 or BS 148 Oil shall be filtered and tested for break down voltage (BDV) and moisture content before filling. The oil shall be filled under vacuum.

Tank :
The transformer tank is of robust construction rectangular in shape and shall be built up of electrically tested welded mild steel plates of thickness of 6 mm for top and bottom and 4 mm side plate.

Conservator :
The capacity of a conservator tank is designed keeping in Observation the total quantity of oil and its contraction and expansion due to temperature variations The total volume of conservator shall be such as to contain10% quantity of the oil. Normally 3% quantity the oil shall be contained in the conservator.

BUSHINGS:
for 11 kV, 17.5 kV class bushings and for 0.433 kV, 1.1 kV class bushings shall be used.

TESTING : We are conduct all routin test.


Request
Callback
Yes! I am Interested

High Power Transformer

High Power Transformer
  • High Power Transformer
  • High Power Transformer
Get Best Quote
Approx. Price: Rs 3.35 Lakh / PieceGet Latest Price

Product Details:

Rated KVAKVA Capacity As Per requirement
TapingAs Per Costumer Requirement
ImpedanceAs Per BIS
No Load LossesAs Per Costumer Requirement
Full Load LossesAs per BIS Lavel
Load Losses At Half LoadAs Per BIS Lavel
Service and DutyContinuous
No Of PhaseThree
Nominal Voltage11 KV / 22 KV / 33 KV
LV Voltage0.433 KV
InstalatonIndoor / Outdoor
Type Of CoolingAir cooled / Oil Cooled
Vector GroupAs Per Costumer Requirement
Orientation Of HV And LVGeneral 180 Degree And If Required 90 Degree
Temprature rise Oil And Winding50 / 55 degree

KAY PEE offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. KAY PEE 's liquid-filled transformers are manufactured in accordance with the most demanding industry and international standards. Transformers can be used for indoor or outdoor applications and can be provided with off-load and on-load tap changers.

The transformer are manufactured in accordance with IS 2026/1977, IS 1180/2016, IEC 60076 or as per customer’s custom requirement.

The transformers will be suitable for outdoor installation with three phase, 50Hz, 11 kV system in which the neutral is effectively earthed and theyshould be suitable for service with fluctuations in supply voltage up to plus 12.5% to minus 12.5%.


Range :
The standard ratings shall be 250, 315, 400, 500, 630, 800, 1000, 1250, 1500, 1600, 2000 and 2500 KVA for 11 kV distribution transformers.


Vector Group
: As per customer’s custom requirement.

Core :
The core shall be stack / wound type of high grade cold rolled grain oriented annealed steel lamination having low loss and good grain properties, coated with hot oil proof insulation, bolted together and to the frames firmly to prevent vibration or noise.

Core Test
: The preliminary core loss test will be conducted before passing to the assembly stage.

Winding :
HV and LV windings shall be wound from Super Enamel covered /Double Paper covered, aluminum /copper conductor/ foil.

Tapings :
For ratings higher than 250 kVA, tapping shall be provided if required by the purchaser on the higher voltage winding for variation of HV voltage within range of (+) 5.0 % to (-)15.0 % in steps of 2.5%.

OIL :
The insulating oil shall comply with the requirements of IS 335 or BS 148 Oil shall be filtered and tested for break down voltage (BDV) and moisture content before filling. The oil shall be filled under vacuum.

Tank :
The transformer tank is of robust construction rectangular in shape and shall be built up of electrically tested welded mild steel plates of thickness of 6 mm for top and bottom and 4 mm side plate.

Conservator :
The capacity of a conservator tank is designed keeping in Observation the total quantity of oil and its contraction and expansion due to temperature variations The total volume of conservator shall be such as to contain10% quantity of the oil. Normally 3% quantity the oil shall be contained in the conservator.

BUSHINGS:
for 11 kV, 17.5 kV class bushings and for 0.433 kV, 1.1 kV class bushings shall be used.

TESTING : We are conduct all routin test.

Request
Callback
Yes! I am Interested

High tension Transformers

High tension Transformers
  • High tension Transformers
  • High tension Transformers
Get Best Quote
Approx. Price: Rs 3.35 Lakh / OnwordGet Latest Price

Product Details:

Rated KVAAs costumer requirement(250 KVA To 2500 KVA)
No Of PhaseThree
Nominal Voltage11 KV / 22 KV / 33 KV
Secondary VoltageAs Per Costumer Requirement (Generally 433 Voltage)
InstalatonIndoor / Outdoor
Type Of CoolingOil Cooled
Phase GroupAs Per vector group
Orientation Of HV And LVGeneral 180 Degree And If Required 90 Degree
Temprature rise Oil And Winding50 / 55 degree
TapingAs Per Costumer Requirement( Generally +5% To -5%)
percentage ImpedanceAs Per BIS
No Load LossesAs Per Costumer Requirement
No Load currentLess then 3 Percent of Full load current
Full load lossesAs Per BIS Lavel
Load Losses At half LoadAs per BIS lavel

KAY PEE offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. KAY PEE 's liquid-filled transformers are manufactured in accordance with the most demanding industry and international standards. Transformers can be used for indoor or outdoor applications and can be provided with off-load and on-load tap changers. 

The transformer are manufactured in accordance with IS 2026/1977, IS 1180/2016, IEC 60076 or as per customer’s custom requirement.

The transformers will be suitable for outdoor installation with three phase, 50Hz, 11 kV system in which the neutral is effectively earthed and theyshould be suitable for service with fluctuations in supply voltage up to plus 12.5% to minus 12.5%.


Range :
 The standard ratings shall be 250, 315, 400, 500, 630, 800, 1000, 1250, 1500, 1600, 2000 and 2500 KVA for 11 kV distribution transformers.


Vector Group 
As per customer’s custom requirement.

Core :
 The core shall be stack / wound type of high grade cold rolled grain oriented annealed steel lamination having low loss and good grain properties, coated with hot oil proof insulation, bolted together and to the frames firmly to prevent vibration or noise.

Core Test 
The preliminary core loss test will be conducted before passing to the assembly stage.

Winding : 
HV and LV windings shall be wound from Super Enamel covered /Double Paper covered, aluminum /copper conductor/ foil.

Tapings : 
For ratings higher than 250 kVA, tapping shall be provided if required by the purchaser on the higher voltage winding for variation of HV voltage within range of (+) 5.0 % to (-)15.0 % in steps of 2.5%.

OIL :
 The insulating oil shall comply with the requirements of IS 335 or BS 148 Oil shall be filtered and tested for break down voltage (BDV) and moisture content before filling. The oil shall be filled under vacuum.

Tank :
The transformer tank is of robust construction rectangular in shape and shall be built up of electrically tested welded mild steel plates of thickness of 6 mm for top and bottom and 4 mm side plate.

Conservator : 
The capacity of a conservator tank is designed keeping in Observation the total quantity of oil and its contraction and expansion due to temperature variations The total volume of conservator shall be such as to contain10% quantity of the oil. Normally 3% quantity the oil shall be contained in the conservator.

BUSHINGS:
 for 11 kV, 17.5 kV class bushings and for 0.433 kV, 1.1 kV class bushings shall be used.

TESTING : We are conduct all routin test. 


Request
Callback
Yes! I am Interested

Oil Filled Transformer ( Oil Cooled )

Oil Filled Transformer ( Oil Cooled )
  • Oil Filled Transformer ( Oil Cooled )
  • Oil Filled Transformer ( Oil Cooled )
  • Oil Filled Transformer ( Oil Cooled )
  • Oil Filled Transformer ( Oil Cooled )
  • Oil Filled Transformer ( Oil Cooled )
  • Oil Filled Transformer ( Oil Cooled )
  • Oil Filled Transformer ( Oil Cooled )
  • Oil Filled Transformer ( Oil Cooled )
  • Oil Filled Transformer ( Oil Cooled )
  • Oil Filled Transformer ( Oil Cooled )
  • Oil Filled Transformer ( Oil Cooled )
  • Oil Filled Transformer ( Oil Cooled )
  • Oil Filled Transformer ( Oil Cooled )
Get Best Quote
Approx. Price: Rs 3.35 Lakh / PieceGet Latest Price

Product Details:

Rated KVAAs costumer requirement(250 KVA To 2500 KVA)
TapingAs Per Costumer Requirement( Generally +5% To -5%)
ImpedanceAs Per BIS
No Load LossesAs Per Costumer Requirement
Full Load LossesAs per BIS Lavel
Load Losses At Half LoadAs Per BIS Lavel
No Of PhaseThree
Nominal Voltage11 KV / 22 KV / 33 KV
Secondary VoltageAs Per Costumer Requirement (Generally 433 Voltage)
InstallatonIndoor / Outdoor
Type Of CoolingOil Cooled
Vector GroupAs Per Costumer Requirement
Orientation Of HV And LVGeneral 180 Degree And If Required 90 Degree
Temprature rise Oil And Winding50 / 55 degree

KAY PEE offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. KAY PEE 's liquid-filled transformers are manufactured in accordance with the most demanding industry and international standards. Transformers can be used for indoor or outdoor applications and can be provided with off-load and on-load tap changers. 

The transformer are manufactured in accordance with IS 2026/1977, IS 1180/2016, IEC 60076 or as per customer’s custom requirement.

The transformers will be suitable for outdoor installation with three phase, 50Hz, 11 kV system in which the neutral is effectively earthed and theyshould be suitable for service with fluctuations in supply voltage up to plus 12.5% to minus 12.5%.


Range :
 The standard ratings shall be 250, 315, 400, 500, 630, 800, 1000, 1250, 1500, 1600, 2000 and 2500 KVA for 11 kV distribution transformers.


Vector Group 
As per customer’s custom requirement.

Core :
 The core shall be stack / wound type of high grade cold rolled grain oriented annealed steel lamination having low loss and good grain properties, coated with hot oil proof insulation, bolted together and to the frames firmly to prevent vibration or noise.

Core Test 
The preliminary core loss test will be conducted before passing to the assembly stage.

Winding : 
HV and LV windings shall be wound from Super Enamel covered /Double Paper covered, aluminum /copper conductor/ foil.

Tapings : 
For ratings higher than 250 kVA, tapping shall be provided if required by the purchaser on the higher voltage winding for variation of HV voltage within range of (+) 5.0 % to (-)15.0 % in steps of 2.5%.

OIL :
 The insulating oil shall comply with the requirements of IS 335 or BS 148 Oil shall be filtered and tested for break down voltage (BDV) and moisture content before filling. The oil shall be filled under vacuum.

Tank :
The transformer tank is of robust construction rectangular in shape and shall be built up of electrically tested welded mild steel plates of thickness of 6 mm for top and bottom and 4 mm side plate.

Conservator : 
The capacity of a conservator tank is designed keeping in Observation the total quantity of oil and its contraction and expansion due to temperature variations The total volume of conservator shall be such as to contain10% quantity of the oil. Normally 3% quantity the oil shall be contained in the conservator.

BUSHINGS:
 for 11 kV, 17.5 kV class bushings and for 0.433 kV, 1.1 kV class bushings shall be used.

TESTING : We are conduct all routin test. 

Request
Callback
Yes! I am Interested

Substation Transformers

Substation Transformers
  • Substation Transformers
  • Substation Transformers
Get Best Quote
Approx. Price: Rs 3.35 Lakh / PieceGet Latest Price

Product Details:

Rated KVAAs Per costumer requirement(250 KVA To 2500 KVA)
Temprature rise Oil and Winding50 / 55 degree
TapingAs Per Costumer Requirement( Generally +5% To -5%)
ImpedanceAs Per BIS
No Load lossesAs Per Costumer Requirement
No load CurrentLess Then 3 Percentage of Full Load current
Fill Load LossesAs Per BIS Lavel
Load Losses At Half LoadAs Per BIS Lavel
No Of PhaseThree
Nominal Voltage11 KV / 22 KV / 33 KV
Secondary VoltageAs Per Costumer Requirement (Generally 433 Voltage)
supply Frequency50 / 60 Hz
Installationindoor / Outdoor
Type Of CoolingOil Cooled
phase GroupAs per Vector Group
Orientation Of HV And LVGeneral 180 Degree And If Required 90 Degree

KAY PEE offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. KAY PEE 's liquid-filled transformers are manufactured in accordance with the most demanding industry and international standards. Transformers can be used for indoor or outdoor applications and can be provided with off-load and on-load tap changers. 

The transformer are manufactured in accordance with IS 2026/1977, IS 1180/2016, IEC 60076 or as per customer’s custom requirement.

The transformers will be suitable for outdoor installation with three phase, 50Hz, 11 kV system in which the neutral is effectively earthed and theyshould be suitable for service with fluctuations in supply voltage up to plus 12.5% to minus 12.5%.


Range :
 The standard ratings shall be 250, 315, 400, 500, 630, 800, 1000, 1250, 1500, 1600, 2000 and 2500 KVA for 11 kV distribution transformers.


Vector Group 
As per customer’s custom requirement.

Core :
 The core shall be stack / wound type of high grade cold rolled grain oriented annealed steel lamination having low loss and good grain properties, coated with hot oil proof insulation, bolted together and to the frames firmly to prevent vibration or noise.

Core Test 
The preliminary core loss test will be conducted before passing to the assembly stage.

Winding : 
HV and LV windings shall be wound from Super Enamel covered /Double Paper covered, aluminum /copper conductor/ foil.

Tapings : 
For ratings higher than 250 kVA, tapping shall be provided if required by the purchaser on the higher voltage winding for variation of HV voltage within range of (+) 5.0 % to (-)15.0 % in steps of 2.5%.

OIL :
 The insulating oil shall comply with the requirements of IS 335 or BS 148 Oil shall be filtered and tested for break down voltage (BDV) and moisture content before filling. The oil shall be filled under vacuum.

Tank :
The transformer tank is of robust construction rectangular in shape and shall be built up of electrically tested welded mild steel plates of thickness of 6 mm for top and bottom and 4 mm side plate.

Conservator : 
The capacity of a conservator tank is designed keeping in Observation the total quantity of oil and its contraction and expansion due to temperature variations The total volume of conservator shall be such as to contain10% quantity of the oil. Normally 3% quantity the oil shall be contained in the conservator.

BUSHINGS:
 for 11 kV, 17.5 kV class bushings and for 0.433 kV, 1.1 kV class bushings shall be used.

TESTING : We are conduct all routin test. 

Request
Callback
Yes! I am Interested

Three Phase Transformer ( distribution )

Three Phase Transformer ( distribution )
  • Three Phase Transformer ( distribution )
  • Three Phase Transformer ( distribution )
Get Best Quote
Approx. Price: Rs 3.35 Lakh / OnwardsGet Latest Price

Product Details:

Rated KVAAs costumer requirement(250 KVA To 2500 KVA)
No Of PhaseThree
Supply Frequency50 / 60 Hz
Nominal Voltage11 KV / 22 KV / 33 KV
Secondary VoltageAs Per Costumer Requirement (Generally 433 Voltage)
Installationindoor / Outdoor
Type Of CoolingOil Cooled
Phase GroupAs Per vector group
Orientation Of HV And LVGeneral 180 Degree And If Required 90 Degree
Temprature Rise Oil And Winding50 / 55 Degree
TappingAs Per Costumer Requirement( Generally +5% To -5%)
ImpedanceAs Per BIS
No Load LossesAs Per Costumer Requirement
No Load CurrentLess Then 3 Percentage
Full Load LossesAs per BIS Lavel
Load Loss At Half LoadAs Per BIS Lavel

KAY PEE offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. KAY PEE 's liquid-filled transformers are manufactured in accordance with the most demanding industry and international standards. Transformers can be used for indoor or outdoor applications and can be provided with off-load and on-load tap changers. 

The transformer are manufactured in accordance with IS 2026/1977, IS 1180/2016, IEC 60076 or as per customer’s custom requirement.

The transformers will be suitable for outdoor installation with three phase, 50Hz, 11 kV system in which the neutral is effectively earthed and theyshould be suitable for service with fluctuations in supply voltage up to plus 12.5% to minus 12.5%.


Range :
 The standard ratings shall be 250, 315, 400, 500, 630, 800, 1000, 1250, 1500, 1600, 2000 and 2500 KVA for 11 kV distribution transformers.


Vector Group 
As per customer’s custom requirement.

Core :
 The core shall be stack / wound type of high grade cold rolled grain oriented annealed steel lamination having low loss and good grain properties, coated with hot oil proof insulation, bolted together and to the frames firmly to prevent vibration or noise.

Core Test 
The preliminary core loss test will be conducted before passing to the assembly stage.

Winding : 
HV and LV windings shall be wound from Super Enamel covered /Double Paper covered, aluminum /copper conductor/ foil.

Tapings : 
For ratings higher than 250 kVA, tapping shall be provided if required by the purchaser on the higher voltage winding for variation of HV voltage within range of (+) 5.0 % to (-)15.0 % in steps of 2.5%.

OIL :
 The insulating oil shall comply with the requirements of IS 335 or BS 148 Oil shall be filtered and tested for break down voltage (BDV) and moisture content before filling. The oil shall be filled under vacuum.

Tank :
The transformer tank is of robust construction rectangular in shape and shall be built up of electrically tested welded mild steel plates of thickness of 6 mm for top and bottom and 4 mm side plate.

Conservator : 
The capacity of a conservator tank is designed keeping in Observation the total quantity of oil and its contraction and expansion due to temperature variations The total volume of conservator shall be such as to contain10% quantity of the oil. Normally 3% quantity the oil shall be contained in the conservator.

BUSHINGS:
 for 11 kV, 17.5 kV class bushings and for 0.433 kV, 1.1 kV class bushings shall be used.

TESTING : We are conduct all routin test. 


Request
Callback
Yes! I am Interested

11 KV / 0.433 KV Distribution Transformer

11 KV / 0.433 KV Distribution Transformer
  • 11 KV / 0.433 KV Distribution Transformer
  • 11 KV / 0.433 KV Distribution Transformer
Get Best Quote
Approx. Price: Rs 3.35 Lakh / onwardGet Latest Price

Product Details:

Rated KVAAs costumer requirement(250 KVA To 2500 KVA)
No Of PhaseThree
Nominal Voltage11 KV / 22 KV / 33 KV
Secondary VoltageAs Per Costumer Requirement (Generally 433 Voltage)
Supply Frequency50 / 60 Hz
Type Of CoolingOil Cooled
Installationindoor
Orientation Of HV And LVGeneral 180 Degree And If Required 90 Degree
Phase GroupAs Per vector group
Temperature rise oil and Winding50 / 55 Degree
TappingAs Per Costumer Requirement( Generally +5% To -5%)
ImpedanceAs Per BIS
No Load currentLess then 3 Percent of Full load current
No Load LossesAs Per Costumer Requirement
Full Load LossesAs per BIS Lavel
Load Loss At Half LoadAs Per BIS Lavel

KAY PEE offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. KAY PEE 's liquid-filled transformers are manufactured in accordance with the most demanding industry and international standards. Transformers can be used for indoor or outdoor applications and can be provided with off-load and on-load tap changers. 

The transformer are manufactured in accordance with IS 2026/1977, IS 1180/2016, IEC 60076 or as per customer’s custom requirement.

The transformers will be suitable for outdoor installation with three phase, 50Hz, 11 kV system in which the neutral is effectively earthed and theyshould be suitable for service with fluctuations in supply voltage up to plus 12.5% to minus 12.5%.


Range :
 The standard ratings shall be 250, 315, 400, 500, 630, 800, 1000, 1250, 1500, 1600, 2000 and 2500 KVA for 11 kV distribution transformers.


Vector Group 
As per customer’s custom requirement.

Core :
 The core shall be stack / wound type of high grade cold rolled grain oriented annealed steel lamination having low loss and good grain properties, coated with hot oil proof insulation, bolted together and to the frames firmly to prevent vibration or noise.

Core Test 
The preliminary core loss test will be conducted before passing to the assembly stage.

Winding : 
HV and LV windings shall be wound from Super Enamel covered /Double Paper covered, aluminum /copper conductor/ foil.

Tapings : 
For ratings higher than 250 kVA, tapping shall be provided if required by the purchaser on the higher voltage winding for variation of HV voltage within range of (+) 5.0 % to (-)15.0 % in steps of 2.5%.

OIL :
 The insulating oil shall comply with the requirements of IS 335 or BS 148 Oil shall be filtered and tested for break down voltage (BDV) and moisture content before filling. The oil shall be filled under vacuum.

Tank :
The transformer tank is of robust construction rectangular in shape and shall be built up of electrically tested welded mild steel plates of thickness of 6 mm for top and bottom and 4 mm side plate.

Conservator : 
The capacity of a conservator tank is designed keeping in Observation the total quantity of oil and its contraction and expansion due to temperature variations The total volume of conservator shall be such as to contain10% quantity of the oil. Normally 3% quantity the oil shall be contained in the conservator.

BUSHINGS:
 for 11 kV, 17.5 kV class bushings and for 0.433 kV, 1.1 kV class bushings shall be used.

TESTING : We are conduct all routin test. 


Request
Callback
Yes! I am Interested

OLTC ( On Load Tap Changer) Distribution Transformer

OLTC  ( On Load Tap Changer) Distribution Transformer
  • OLTC  ( On Load Tap Changer) Distribution Transformer
  • OLTC  ( On Load Tap Changer) Distribution Transformer
Get Best Quote
Approx. Price: Rs 3.35 Lakh / PieceGet Latest Price

Product Details:

Rated KVAAs costumer requirement(250 KVA To 2500 KVA)
TapingAs Per Costumer Requirement( Generally +5% To -5%)
ImpedanceAs Per BIS
No Load LossesAs Per Costumer Requirement
Full Load LossesAs per BIS Lavel
Load Losses At Half LoadAs Per BIS Lavel
No Load CurrentLess Then 3 Percentage
No Of PhaseThree
Nominal Voltage11 KV / 22 KV / 33 KV
Secondary VoltageAs Per Costumer Requirement (Generally 433 Voltage)
InstalatonIndoor / Outdoor
Type Of CoolingOil Cooled
Phase GroupAs Per vector group
Orientation Of HV And LVGeneral 180 Degree And If Required 90 Degree
Temprature rise Oil And Winding50 / 55 degree

KAY PEE offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. KAY PEE 's liquid-filled transformers are manufactured in accordance with the most demanding industry and international standards. Transformers can be used for indoor or outdoor applications and can be provided with off-load and on-load tap changers. 

The transformer are manufactured in accordance with IS 2026/1977, IS 1180/2016, IEC 60076 or as per customer’s custom requirement.

The transformers will be suitable for outdoor installation with three phase, 50Hz, 11 kV system in which the neutral is effectively earthed and theyshould be suitable for service with fluctuations in supply voltage up to plus 12.5% to minus 12.5%.


Range :
 The standard ratings shall be 250, 315, 400, 500, 630, 800, 1000, 1250, 1500, 1600, 2000 and 2500 KVA for 11 kV distribution transformers.


Vector Group 
As per customer’s custom requirement.

Core :
 The core shall be stack / wound type of high grade cold rolled grain oriented annealed steel lamination having low loss and good grain properties, coated with hot oil proof insulation, bolted together and to the frames firmly to prevent vibration or noise.

Core Test 
The preliminary core loss test will be conducted before passing to the assembly stage.

Winding : 
HV and LV windings shall be wound from Super Enamel covered /Double Paper covered, aluminum /copper conductor/ foil.

Tapings : 
For ratings higher than 250 kVA, tapping shall be provided if required by the purchaser on the higher voltage winding for variation of HV voltage within range of (+) 5.0 % to (-)15.0 % in steps of 2.5%.

OIL :
 The insulating oil shall comply with the requirements of IS 335 or BS 148 Oil shall be filtered and tested for break down voltage (BDV) and moisture content before filling. The oil shall be filled under vacuum.

Tank :
The transformer tank is of robust construction rectangular in shape and shall be built up of electrically tested welded mild steel plates of thickness of 6 mm for top and bottom and 4 mm side plate.

Conservator : 
The capacity of a conservator tank is designed keeping in Observation the total quantity of oil and its contraction and expansion due to temperature variations The total volume of conservator shall be such as to contain10% quantity of the oil. Normally 3% quantity the oil shall be contained in the conservator.

BUSHINGS:
 for 11 kV, 17.5 kV class bushings and for 0.433 kV, 1.1 kV class bushings shall be used.

TESTING : We are conduct all routin test. 

Request
Callback
Yes! I am Interested

Furnace Transformer

Furnace Transformer
  • Furnace Transformer
  • Furnace Transformer
Get Best Quote
Approx. Price: Rs 3.35 Lakh / PieceGet Latest Price

Product Details:

Make" KAY PEE "
Orientatin of HV And LVGeneral 180 degree If required 90 Degree
Temprature Rise Oil And Winding60 / 65 Degree
TappingAs Per Costumer Requirement( Generally +5% To -5%)
ImpedanceAs Per Costumer Demand
No Load LossAs Per Costumer Required
No load CurrentLess Then 3 Percentage of rated Current
Full Load LossesAs Per IS 2026
KVAAs Per Costumer Requirement ( 10 KVA To 2500 KVA )
No Of PhaseThree
Nominal Voltage11 KV / 22 KV / 33 KV
Secondary VoltageAs Per Costumer Requirement (Generally 433 Voltage)
Supply Frequency50 / 60 Hz
InstallationIndoor / Outdoor
Type Of CoolingOil Cooled
Vector GroupAs Per Costumer Required

KAY PEE offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. KAY PEE 's liquid-filled transformers are manufactured in accordance with the most demanding industry and international standards. Transformers can be used for indoor or outdoor applications and can be provided with off-load and on-load tap changers.

The transformer are manufactured in accordance with IS 2026/1977, IEC 60076 or as per customer’s custom requirement.

The transformers will be suitable for outdoor installation with three phase, 50Hz, 11 kV system in which the neutral is effectively earthed and theyshould be suitable for service with fluctuations in supply voltage up to plus 12.5% to minus 12.5%.


Range :
The standard ratings shall be 250, 315, 400, 500, 630, 800, 1000, 1250, 1500, 1600, 2000 and 2500 KVA for 11 kV distribution transformers.


Vector Group
: As percustomer’s custom requirement.

Core :
The core shall be stack / wound type of high grade cold rolled grain oriented annealed steel lamination having low loss and good grain properties, coated with hot oil proof insulation, bolted together and to the frames firmly to prevent vibration or noise.

Core Test
: The preliminary core loss test will be conducted before passing to the assembly stage.

Winding :
HV and LV windings shall be wound from Super Enamel covered /Double Paper covered, aluminum /copper conductor/ foil.

Tapings :
For ratings higher than 250 kVA, tapping shall be provided if required by the purchaser on the higher voltage winding for variation of HV voltage within range of (+) 5.0 % to (-)15.0 % in steps of 2.5%.

OIL :
The insulating oil shall comply with the requirements of IS 335 or BS 148 Oil shall be filtered and tested for break down voltage (BDV) and moisture content before filling. The oil shall be filled under vacuum.

Tank :
The transformer tank is of robust construction rectangular in shape and shall be built up of electrically tested welded mild steel plates of thickness of 6 mm for top and bottom and 4 mm side plate.

Conservator :
The capacity of a conservator tank is designed keeping in Observation the total quantity of oil and its contraction and expansion due to temperature variations The total volume of conservator shall be such as to contain10% quantity of the oil. Normally 3% quantity the oil shall be contained in the conservator.

BUSHINGS:
for 11 kV, 17.5 kV class bushings and for 0.433 kV, 1.1 kV class bushings shall be used.

TESTING : We are conduct all routin test.




Request
Callback
Yes! I am Interested

OCTC ( Of Circuit Tap Changer ) Three Phase Distribution Transformer

OCTC ( Of Circuit Tap Changer ) Three Phase Distribution Transformer
  • OCTC ( Of Circuit Tap Changer ) Three Phase Distribution Transformer
  • OCTC ( Of Circuit Tap Changer ) Three Phase Distribution Transformer
  • OCTC ( Of Circuit Tap Changer ) Three Phase Distribution Transformer
Get Best Quote
Approx. Price: Rs 3.35 Lakh / PieceGet Latest Price

Product Details:

KVAAs per costumer Requirement (250 KVA To 2500 KVA
ImpedanceAs Per BIS
No Load LossesAs Per Costumer Requirement
No Load currentLess then 3 Percent of Full load current
Full load lossesAs Per BIS Lavel
No Load Losses at Half LoadAs per BIS Lavel
Nominal Voltage11 KV / 22 KV / 33 KV
Secondary VoltageAs Per Costumer Requirement (Generally 433 Voltage)
No Of PhaseThree
Type Of CoolingOil Cooled
Installationindoor / Outdoor
Orientation Of HV And LVGeneral 180 Degree And If Required 90 Degree
TapingAs Per Costumer Requirement( Generally +5% To -5%)
Phase GroupAs Per vector group

KAY PEE offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. KAY PEE 's liquid-filled transformers are manufactured in accordance with the most demanding industry and international standards. Transformers can be used for indoor or outdoor applications and can be provided with off-load and on-load tap changers.

The transformer are manufactured in accordance with IS 2026/1977, IS 1180/2016, IEC 60076 or as per customer’s custom requirement.

The transformers will be suitable for outdoor installation with three phase, 50Hz, 11 kV system in which the neutral is effectively earthed and theyshould be suitable for service with fluctuations in supply voltage up to plus 12.5% to minus 12.5%.


Range :
The standard ratings shall be 250, 315, 400, 500, 630, 800, 1000, 1250, 1500, 1600, 2000 and 2500 KVA for 11 kV distribution transformers.


Vector Group
: As percustomer’s custom requirement.

Core :
The core shall be stack / wound type of high grade cold rolled grain oriented annealed steel lamination having low loss and good grain properties, coated with hot oil proof insulation, bolted together and to the frames firmly to prevent vibration or noise.

Core Test
: The preliminary core loss test will be conducted before passing to the assembly stage.

Winding :
HV and LV windings shall be wound from Super Enamel covered /Double Paper covered, aluminum /copper conductor/ foil.

Tapings :
For ratings higher than 250 kVA, tapping shall be provided if required by the purchaser on the higher voltage winding for variation of HV voltage within range of (+) 5.0 % to (-)15.0 % in steps of 2.5%.

OIL :
The insulating oil shall comply with the requirements of IS 335 or BS 148 Oil shall be filtered and tested for break down voltage (BDV) and moisture content before filling. The oil shall be filled under vacuum.

Tank :
The transformer tank is of robust construction rectangular in shape and shall be built up of electrically tested welded mild steel plates of thickness of 6 mm for top and bottom and 4 mm side plate.

Conservator :
The capacity of a conservator tank is designed keeping in Observation the total quantity of oil and its contraction and expansion due to temperature variations The total volume of conservator shall be such as to contain10% quantity of the oil. Normally 3% quantity the oil shall be contained in the conservator.

BUSHINGS:
for 11 kV, 17.5 kV class bushings and for 0.433 kV, 1.1 kV class bushings shall be used.

TESTING : We are conduct all routin test.

Request
Callback
Yes! I am Interested

High Voltage Transformer

High Voltage Transformer
  • High Voltage Transformer
  • High Voltage Transformer
Ask For Price
Product Price :Get Latest Price

Product Details:

Rated KVAAs costumer requirement(250 KVA To 2500 KVA)
TapingAs Per Costumer Requirement( Generally +5% To -5%)
ImpedanceAs Per BIS
No Load LossesAs Per Costumer Requirement
Full Load LossesAs per BIS Lavel
Load Losses At Half LoadAs Per BIS Lavel
No Load CurrentLess Then 3 Percentage
No Of PhaseThree
Nominal Voltage11 KV / 22 KV / 33 KV
Secondary VoltageAs Per Costumer Requirement (Generally 433 Voltage)
InstalatonIndoor / Outdoor
Type Of CoolingOil Cooled
Vector GroupAs Per Costumer Requirement
Orientation Of HV And LVGeneral 180 Degree And If Required 90 Degree
Temprature rise Oil And Winding50 / 55 degree

KAY PEE offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. KAY PEE 's liquid-filled transformers are manufactured in accordance with the most demanding industry and international standards. Transformers can be used for indoor or outdoor applications and can be provided with off-load and on-load tap changers.

The transformer are manufactured in accordance with IS 2026/1977, IS 1180/2016, IEC 60076 or as per customer’s custom requirement.

The transformers will be suitable for outdoor installation with three phase, 50Hz, 11 kV system in which the neutral is effectively earthed and theyshould be suitable for service with fluctuations in supply voltage up to plus 12.5% to minus 12.5%.


Range :
The standard ratings shall be 250, 315, 400, 500, 630, 800, 1000, 1250, 1500, 1600, 2000 and 2500 KVA for 11 kV distribution transformers.


Vector Group
: As per customer’s custom requirement.

Core :
The core shall be stack / wound type of high grade cold rolled grain oriented annealed steel lamination having low loss and good grain properties, coated with hot oil proof insulation, bolted together and to the frames firmly to prevent vibration or noise.

Core Test
: The preliminary core loss test will be conducted before passing to the assembly stage.

Winding :
HV and LV windings shall be wound from Super Enamel covered /Double Paper covered, aluminum /copper conductor/ foil.

Tapings :
For ratings higher than 250 kVA, tapping shall be provided if required by the purchaser on the higher voltage winding for variation of HV voltage within range of (+) 5.0 % to (-)15.0 % in steps of 2.5%.

OIL :
The insulating oil shall comply with the requirements of IS 335 or BS 148 Oil shall be filtered and tested for break down voltage (BDV) and moisture content before filling. The oil shall be filled under vacuum.

Tank :
The transformer tank is of robust construction rectangular in shape and shall be built up of electrically tested welded mild steel plates of thickness of 6 mm for top and bottom and 4 mm side plate.

Conservator :
The capacity of a conservator tank is designed keeping in Observation the total quantity of oil and its contraction and expansion due to temperature variations The total volume of conservator shall be such as to contain10% quantity of the oil. Normally 3% quantity the oil shall be contained in the conservator.

BUSHINGS:
for 11 kV, 17.5 kV class bushings and for 0.433 kV, 1.1 kV class bushings shall be used.

TESTING : We are conduct all routin test.

 

Request
Callback
Yes! I am Interested
View PDF

Power & Distribution Transformer

Power & Distribution Transformer
  • Power & Distribution Transformer
  • Power & Distribution Transformer
  • Power & Distribution Transformer
  • Power & Distribution Transformer
  • Power & Distribution Transformer
  • Power & Distribution Transformer
  • Power & Distribution Transformer
  • Power & Distribution Transformer
  • Power & Distribution Transformer
  • Power & Distribution Transformer
Get Best Quote
Approx. Price: Rs 3.35 Lakh / PieceGet Latest Price

Product Details:

Output Voltage0.433 KV
Rated Voltage11 KV
Orientation Of HV and LVGeneral 180 degree if require 90 degree
Temprature Rise Oil and Winding50 / 55 degree
TapingAs Per Costumer Requirement
ImpedanceAs Per BIS
No load CurrentLess Then 3 Percentage of Full Load current
No Load LossesAs Per Costumer Requirement
Full Load LossesAs per BIS Lavel
Load Losses At Half LoadAs Per BIS Lavel
Rated CapacityKVA As Per Requirement
No Of PhaseThree
InstallatonIndoor / Outdoor
Vector GroupeAs Per Costumer Requirement
Type Of CoolingAir Cooled / Oil Cooled

KAY PEE offers a complete range of power and distribution transformers designed to grant the reliability, durability, and efficiency required in utility, industrial, and commercial applications. KAY PEE 's liquid-filled transformers are manufactured in accordance with the most demanding industry and international standards. Transformers can be used for indoor or outdoor applications and can be provided with off-load and on-load tap changers. 

The transformer are manufactured in accordance with IS 2026/1977, IS 1180/2016, IEC 60076 or as per customer’s custom requirement.

The transformers will be suitable for outdoor installation with three phase, 50Hz, 11 kV system in which the neutral is effectively earthed and theyshould be suitable for service with fluctuations in supply voltage up to plus 12.5% to minus 12.5%.


Range :
 The standard ratings shall be 250, 315, 400, 500, 630, 800, 1000, 1250, 1500, 1600, 2000 and 2500 KVA for 11 kV distribution transformers.


Vector Group 
As per customer’s custom requirement.

Core :
 The core shall be stack / wound type of high grade cold rolled grain oriented annealed steel lamination having low loss and good grain properties, coated with hot oil proof insulation, bolted together and to the frames firmly to prevent vibration or noise.

Core Test 
The preliminary core loss test will be conducted before passing to the assembly stage.

Winding : 
HV and LV windings shall be wound from Super Enamel covered /Double Paper covered, aluminum /copper conductor/ foil.

Tapings : 
For ratings higher than 250 kVA, tapping shall be provided if required by the purchaser on the higher voltage winding for variation of HV voltage within range of (+) 5.0 % to (-)15.0 % in steps of 2.5%.

OIL :
 The insulating oil shall comply with the requirements of IS 335 or BS 148 Oil shall be filtered and tested for break down voltage (BDV) and moisture content before filling. The oil shall be filled under vacuum.

Tank :
The transformer tank is of robust construction rectangular in shape and shall be built up of electrically tested welded mild steel plates of thickness of 6 mm for top and bottom and 4 mm side plate.

Conservator : 
The capacity of a conservator tank is designed keeping in Observation the total quantity of oil and its contraction and expansion due to temperature variations The total volume of conservator shall be such as to contain10% quantity of the oil. Normally 3% quantity the oil shall be contained in the conservator.

BUSHINGS:
 for 11 kV, 17.5 kV class bushings and for 0.433 kV, 1.1 kV class bushings shall be used.

TESTING : We are conduct all routin test. 




Request
Callback


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
View PDF
X

Explore more products



Reach Us
Hiren Chakalasiya (Proprietor)
Block No. 89, Survey No. 113/2 , Opp. Side Navapara Patiya, Village Motaborsara Kim Taluka Mangrol
Dabholi, Surat- 394110, Gujarat, India



Call Us

Share Us

F GT L


Send E-mailSend SMS