Three Phase LT Transformer

Product Details:

• Three phase or single phase dry-type Or Oil Cooled low voltage (LV) transformers are used as isolation transformers or to adjust the voltage level in the LV distribution grid. The windings are made of aluminum or copper and For dry Type Transformer impregnated with epoxy resin of thermal class F or H by simple or vacuum pressure impregnation (VPI) And Another Are oil Immersed Transformer.

• KAY PEE Make low voltage transformers are widely used in industrial applications and in commercial and public buildings. They are also used for adjusting the voltage from 690 V to 400 V or as isolation transformers with a voltage ratio of 1:1, providing galvanic separation.

• Our products are available for various applications in renewable power generation Like Wind Mills or Solar energy , Mines, marine, railways, Uninterruptible power supply (UPS),Chemical Plant, oil and gas industry ,Converters Etc.

• An isolation transformer is device which is use to decouple two circuit, The Load Comes to the isolation Transformer and to the input supply, Isolation transformer suppresses electrical noices which occurs in transmission line. It is also remove the harmonics in line.

• Type Of LT Power Transformer : Copper Wound, Air Or Oil Cooled, Core Or shell Type, Auto Or Double Wound, Single Or Three Phase, Three Phase To Single Phase conversion Type, High Power Or High Frequency Type With leakage Inductance And Class Of insulation B Or F

Range For Single Phase : 50 VA To 5 KVA (control X'mer),
5 KVA To 50 KVA (LT X'mer), 10KVA To 100 KVA (PolyPhase X'mer)

Range For Three Phase : 10 KVA To 1000 KVA


Type : Dry Type VPI : Resin Cast : Oil Cooled

Additional Information:

• Production Capacity: Up to 1 MVA
• Delivery Time: Depends on Capacity

Product Details:

• Three phase or single phase dry-type Or Oil Cooled low voltage (LV) transformers are used as isolation transformers or to adjust the voltage level in the LV distribution grid. The windings are made of aluminum or copper and For dry Type Transformer impregnated with epoxy resin of thermal class F or H by simple or vacuum pressure impregnation (VPI) And Another Are oil Immersed Transformer.

• KAY PEE Make low voltage transformers are widely used in industrial applications and in commercial and public buildings. They are also used for adjusting the voltage from 690 V to 400 V or as isolation transformers with a voltage ratio of 1:1, providing galvanic separation.

• Our products are available for various applications in renewable power generation Like Wind Mills or Solar energy , Mines, marine, railways, Uninterruptible power supply (UPS),Chemical Plant, oil and gas industry ,Converters Etc.

• An isolation transformer is device which is use to decouple two circuit, The Load Comes to the isolation Transformer and to the input supply, Isolation transformer suppresses electrical noices which occurs in transmission line. It is also remove the harmonics in line.

• Type Of LT Power Transformer : Copper Wound, Air Or Oil Cooled, Core Or shell Type, Auto Or Double Wound, Single Or Three Phase, Three Phase To Single Phase conversion Type, High Power Or High Frequency Type With leakage Inductance And Class Of insulation B Or F

Range For Single Phase : 50 VA To 5 KVA (control X'mer), 
5 KVA To 50 KVA (LT X'mer), 10KVA To 100 KVA (PolyPhase X'mer) 

Range For Three Phase : 10 KVA To 1000 KVA


Type : Dry Type VPI : Resin Cast : Oil Cooled

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Riding on unfathomable volumes of market knowledge, we are presenting an outstanding range of Oil Cool Transformer. The offered transformer is manufactured & designed under the observation of our experts by utilizing finest quality material and advanced tools. This transformer is available to our customers with lots of specifications & customization options as per their needs. We provide this transformer after inspected it properly from our end in order to dispatch flawless range.

Features:

• Less noise
• Trouble free operation
• Minimum maintenance

Other Details:

• Excitation Transformer
• Generator Transformer
• Isolation Transformer
• Moving Coil Regulator
• Traction Transformer
• Mining Transformer

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

• Three phase or single phase dry-type Or Oil Cooled low voltage (LV) transformers are used as isolation transformers or to adjust the voltage level in the LV distribution grid. The windings are made of aluminum or copper and For dry Type Transformer impregnated with epoxy resin of thermal class F or H by simple or vacuum pressure impregnation (VPI) And Another Are oil Immersed Transformer.

• KAY PEE Make low voltage transformers are widely used in industrial applications and in commercial and public buildings. They are also used for adjusting the voltage from 690 V to 400 V or as isolation transformers with a voltage ratio of 1:1, providing galvanic separation.

• Our products are available for various applications in renewable power generation Like Wind Mills or Solar energy , Mines, marine, railways, Uninterruptible power supply (UPS),Chemical Plant, oil and gas industry ,Converters Etc.

• An isolation transformer is device which is use to decouple two circuit, The Load Comes to the isolation Transformer and to the input supply, Isolation transformer suppresses electrical noices which occurs in transmission line. It is also remove the harmonics in line.

• Type Of LT Power Transformer : Copper Wound, Air Or Oil Cooled, Core Or shell Type, Auto Or Double Wound, Single Or Three Phase, Three Phase To Single Phase conversion Type, High Power Or High Frequency Type With leakage Inductance And Class Of insulation B Or F

Range For Single Phase : 50 VA To 5 KVA (control X'mer), 
5 KVA To 50 KVA (LT X'mer), 10KVA To 100 KVA (PolyPhase X'mer) 

Range For Three Phase : 10 KVA To 1000 KVA


Type : Dry Type VPI : Resin Cast : Oil Cooled

Product Details:

• Three phase or single phase dry-type Or Oil Cooled low voltage (LV) transformers are used as isolation transformers or to adjust the voltage level in the LV distribution grid. The windings are made of aluminum or copper and For dry Type Transformer impregnated with epoxy resin of thermal class F or H by simple or vacuum pressure impregnation (VPI) And Another Are oil Immersed Transformer.

• KAY PEE Make low voltage transformers are widely used in industrial applications and in commercial and public buildings. They are also used for adjusting the voltage from 690 V to 400 V or as isolation transformers with a voltage ratio of 1:1, providing galvanic separation.

• Our products are available for various applications in renewable power generation Like Wind Mills or Solar energy , Mines, marine, railways, Uninterruptible power supply (UPS),Chemical Plant, oil and gas industry ,Converters Etc.

• An isolation transformer is device which is use to decouple two circuit, The Load Comes to the isolation Transformer and to the input supply, Isolation transformer suppresses electrical noices which occurs in transmission line. It is also remove the harmonics in line.

• Type Of LT Power Transformer : Copper Wound, Air Or Oil Cooled, Core Or shell Type, Auto Or Double Wound, Single Or Three Phase, Three Phase To Single Phase conversion Type, High Power Or High Frequency Type With leakage Inductance And Class Of insulation B Or F

Range For Single Phase : 50 VA To 5 KVA (control X'mer), 
5 KVA To 50 KVA (LT X'mer), 10KVA To 100 KVA (PolyPhase X'mer) 

Range For Three Phase : 10 KVA To 1000 KVA


Type : Dry Type VPI : Resin Cast : Oil Cooled

Product Details:

• Three phase or single phase dry-type Or Oil Cooled low voltage (LV) transformers are used as isolation transformers or to adjust the voltage level in the LV distribution grid. The windings are made of aluminum or copper and For dry Type Transformer impregnated with epoxy resin of thermal class F or H by simple or vacuum pressure impregnation (VPI) And Another Are oil Immersed Transformer.

• KAY PEE Make low voltage transformers are widely used in industrial applications and in commercial and public buildings. They are also used for adjusting the voltage from 690 V to 400 V or as isolation transformers with a voltage ratio of 1:1, providing galvanic separation.

• Our products are available for various applications in renewable power generation Like Wind Mills or Solar energy , Mines, marine, railways, Uninterruptible power supply (UPS),Chemical Plant, oil and gas industry ,Converters Etc.

• An isolation transformer is device which is use to decouple two circuit, The Load Comes to the isolation Transformer and to the input supply, Isolation transformer suppresses electrical noices which occurs in transmission line. It is also remove the harmonics in line.

• Type Of LT Power Transformer : Copper Wound, Air Or Oil Cooled, Core Or shell Type, Auto Or Double Wound, Single Or Three Phase, Three Phase To Single Phase conversion Type, High Power Or High Frequency Type With leakage Inductance And Class Of insulation B Or F

Range For Single Phase : 50 VA To 5 KVA (control X'mer),
5 KVA To 50 KVA (LT X'mer), 10KVA To 100 KVA (PolyPhase X'mer)

Range For Three Phase : 10 KVA To 1000 KVA


Type : Dry Type VPI : Resin Cast : Oil Cooled

Product Details:

• Three phase or single phase dry-type Or Oil Cooled low voltage (LV) transformers are used as isolation transformers or to adjust the voltage level in the LV distribution grid. The windings are made of aluminum or copper and For dry Type Transformer impregnated with epoxy resin of thermal class F or H by simple or vacuum pressure impregnation (VPI) And Another Are oil Immersed Transformer.

• KAY PEE Make low voltage transformers are widely used in industrial applications and in commercial and public buildings. They are also used for adjusting the voltage from 690 V to 400 V or as isolation transformers with a voltage ratio of 1:1, providing galvanic separation.

• Our products are available for various applications in renewable power generation Like Wind Mills or Solar energy , Mines, marine, railways, Uninterruptible power supply (UPS),Chemical Plant, oil and gas industry ,Converters Etc.

• An isolation transformer is device which is use to decouple two circuit, The Load Comes to the isolation Transformer and to the input supply, Isolation transformer suppresses electrical noices which occurs in transmission line. It is also remove the harmonics in line.

• Type Of LT Power Transformer : Copper Wound, Air Or Oil Cooled, Core Or shell Type, Auto Or Double Wound, Single Or Three Phase, Three Phase To Single Phase conversion Type, High Power Or High Frequency Type With leakage Inductance And Class Of insulation B Or F

Range For Single Phase : 50 VA To 5 KVA (control X'mer),
5 KVA To 50 KVA (LT X'mer), 10KVA To 100 KVA (PolyPhase X'mer)

Range For Three Phase : 10 KVA To 1000 KVA


Type : Dry Type VPI : Resin Cast : Oil Cooled

Product Details:

• Three phase or single phase dry-type Or Oil Cooled low voltage (LV) transformers are used as isolation transformers or to adjust the voltage level in the LV distribution grid. The windings are made of aluminum or copper and For dry Type Transformer impregnated with epoxy resin of thermal class F or H by simple or vacuum pressure impregnation (VPI) And Another Are oil Immersed Transformer.

• KAY PEE Make low voltage transformers are widely used in industrial applications and in commercial and public buildings. They are also used for adjusting the voltage from 690 V to 400 V or as isolation transformers with a voltage ratio of 1:1, providing galvanic separation.

• Our products are available for various applications in renewable power generation Like Wind Mills or Solar energy , Mines, marine, railways, Uninterruptible power supply (UPS),Chemical Plant, oil and gas industry ,Converters Etc.

• An isolation transformer is device which is use to decouple two circuit, The Load Comes to the isolation Transformer and to the input supply, Isolation transformer suppresses electrical noices which occurs in transmission line. It is also remove the harmonics in line.

• Type Of LT Power Transformer : Copper Wound, Air Or Oil Cooled, Core Or shell Type, Auto Or Double Wound, Single Or Three Phase, Three Phase To Single Phase conversion Type, High Power Or High Frequency Type With leakage Inductance And Class Of insulation B Or F

Range For Single Phase : 50 VA To 5 KVA (control X'mer), 
5 KVA To 50 KVA (LT X'mer), 10KVA To 100 KVA (PolyPhase X'mer) 

Range For Three Phase : 10 KVA To 1000 KVA


Type : Dry Type VPI : Resin Cast : Oil Cooled

Product Details:

We are manufacturing Air cool type and Indoor type OR Out door type of any capacity range Transformer

Note -price starting from INR 4000.


Also known as-

• Dry Type Transformer
• Air cooled transformer up to 11 KV
• Open Type Transformer
• Close Type Transformer
• Air Natural or Air Force
• Panel Mounting transformer

Product Details:

• Three phase or single phase dry-type Or Oil Cooled low voltage (LV) transformers are used as isolation transformers or to adjust the voltage level in the LV distribution grid. The windings are made of aluminum or copper and For dry Type Transformer impregnated with epoxy resin of thermal class F or H by simple or vacuum pressure impregnation (VPI) And Another Are oil Immersed Transformer.

• KAY PEE Make low voltage transformers are widely used in industrial applications and in commercial and public buildings. They are also used for adjusting the voltage from 690 V to 400 V or as isolation transformers with a voltage ratio of 1:1, providing galvanic separation.

• Our products are available for various applications in renewable power generation Like Wind Mills or Solar energy , Mines, marine, railways, Uninterruptible power supply (UPS),Chemical Plant, oil and gas industry ,Converters Etc.

• An isolation transformer is device which is use to decouple two circuit, The Load Comes to the isolation Transformer and to the input supply, Isolation transformer suppresses electrical noices which occurs in transmission line. It is also remove the harmonics in line.

• Type Of LT Power Transformer : Copper Wound, Air Or Oil Cooled, Core Or shell Type, Auto Or Double Wound, Single Or Three Phase, Three Phase To Single Phase conversion Type, High Power Or High Frequency Type With leakage Inductance And Class Of insulation B Or F

Range For Single Phase : 50 VA To 5 KVA (control X'mer), 
5 KVA To 50 KVA (LT X'mer), 10KVA To 100 KVA (PolyPhase X'mer) 

Range For Three Phase : 10 KVA To 1000 KVA


Type : Dry Type VPI : Resin Cast : Oil Cooled

Product Details:

• Three phase or single phase dry-type Or Oil Cooled low voltage (LV) transformers are used as isolation transformers or to adjust the voltage level in the LV distribution grid. The windings are made of aluminum or copper and For dry Type Transformer impregnated with epoxy resin of thermal class F or H by simple or vacuum pressure impregnation (VPI) And Another Are oil Immersed Transformer.

• KAY PEE Make low voltage transformers are widely used in industrial applications and in commercial and public buildings. They are also used for adjusting the voltage from 690 V to 400 V or as isolation transformers with a voltage ratio of 1:1, providing galvanic separation.

• Our products are available for various applications in renewable power generation Like Wind Mills or Solar energy , Mines, marine, railways, Uninterruptible power supply (UPS),Chemical Plant, oil and gas industry ,Converters Etc.

• An isolation transformer is device which is use to decouple two circuit, The Load Comes to the isolation Transformer and to the input supply, Isolation transformer suppresses electrical noices which occurs in transmission line. It is also remove the harmonics in line.

• Type Of LT Power Transformer : Copper Wound, Air Or Oil Cooled, Core Or shell Type, Auto Or Double Wound, Single Or Three Phase, Three Phase To Single Phase conversion Type, High Power Or High Frequency Type With leakage Inductance And Class Of insulation B Or F

Range For Single Phase : 50 VA To 5 KVA (control X'mer), 
5 KVA To 50 KVA (LT X'mer), 10KVA To 100 KVA (PolyPhase X'mer) 

Range For Three Phase : 10 KVA To 1000 KVA


Type : Dry Type VPI : Resin Cast : Oil Cooled

Product Details:

• Three phase or single phase dry-type Or Oil Cooled low voltage (LV) transformers are used as isolation transformers or to adjust the voltage level in the LV distribution grid. The windings are made of aluminum or copper and For dry Type Transformer impregnated with epoxy resin of thermal class F or H by simple or vacuum pressure impregnation (VPI) And Another Are oil Immersed Transformer.

• KAY PEE Make low voltage transformers are widely used in industrial applications and in commercial and public buildings. They are also used for adjusting the voltage from 690 V to 400 V or as isolation transformers with a voltage ratio of 1:1, providing galvanic separation.

• Our products are available for various applications in renewable power generation Like Wind Mills or Solar energy , Mines, marine, railways, Uninterruptible power supply (UPS),Chemical Plant, oil and gas industry ,Converters Etc.

• An isolation transformer is device which is use to decouple two circuit, The Load Comes to the isolation Transformer and to the input supply, Isolation transformer suppresses electrical noices which occurs in transmission line. It is also remove the harmonics in line.

• Type Of LT Power Transformer : Copper Wound, Air Or Oil Cooled, Core Or shell Type, Auto Or Double Wound, Single Or Three Phase, Three Phase To Single Phase conversion Type, High Power Or High Frequency Type With leakage Inductance And Class Of insulation B Or F

Range For Single Phase : 50 VA To 5 KVA (control X'mer),
5 KVA To 50 KVA (LT X'mer), 10KVA To 100 KVA (PolyPhase X'mer)

Range For Three Phase : 10 KVA To 1000 KVA


Type : Dry Type VPI : Resin Cast : Oil Cooled

Product Details:

• Three phase or single phase dry-type Or Oil Cooled low voltage (LV) transformers are used as isolation transformers or to adjust the voltage level in the LV distribution grid. The windings are made of aluminum or copper and For dry Type Transformer impregnated with epoxy resin of thermal class F or H by simple or vacuum pressure impregnation (VPI) And Another Are oil Immersed Transformer.

• KAY PEE Make low voltage transformers are widely used in industrial applications and in commercial and public buildings. They are also used for adjusting the voltage from 690 V to 400 V or as isolation transformers with a voltage ratio of 1:1, providing galvanic separation.

• Our products are available for various applications in renewable power generation Like Wind Mills or Solar energy , Mines, marine, railways, Uninterruptible power supply (UPS),Chemical Plant, oil and gas industry ,Converters Etc.

• An isolation transformer is device which is use to decouple two circuit, The Load Comes to the isolation Transformer and to the input supply, Isolation transformer suppresses electrical noices which occurs in transmission line. It is also remove the harmonics in line.

• Type Of LT Power Transformer : Copper Wound, Air Or Oil Cooled, Core Or shell Type, Auto Or Double Wound, Single Or Three Phase, Three Phase To Single Phase conversion Type, High Power Or High Frequency Type With leakage Inductance And Class Of insulation B Or F

Range For Single Phase : 50 VA To 5 KVA (control X'mer),
5 KVA To 50 KVA (LT X'mer), 10KVA To 100 KVA (PolyPhase X'mer)

Range For Three Phase : 10 KVA To 1000 KVA


Type : Dry Type VPI : Resin Cast : Oil Cooled

Product Details:

• Three phase or single phase dry-type Or Oil Cooled low voltage (LV) transformers are used as isolation transformers or to adjust the voltage level in the LV distribution grid. The windings are made of aluminum or copper and For dry Type Transformer impregnated with epoxy resin of thermal class F or H by simple or vacuum pressure impregnation (VPI) And Another Are oil Immersed Transformer.

• KAY PEE Make low voltage transformers are widely used in industrial applications and in commercial and public buildings. They are also used for adjusting the voltage from 690 V to 400 V or as isolation transformers with a voltage ratio of 1:1, providing galvanic separation.

• Our products are available for various applications in renewable power generation Like Wind Mills or Solar energy , Mines, marine, railways, Uninterruptible power supply (UPS),Chemical Plant, oil and gas industry ,Converters Etc.

• An isolation transformer is device which is use to decouple two circuit, The Load Comes to the isolation Transformer and to the input supply, Isolation transformer suppresses electrical noices which occurs in transmission line. It is also remove the harmonics in line.

• Type Of LT Power Transformer : Copper Wound, Air Or Oil Cooled, Core Or shell Type, Auto Or Double Wound, Single Or Three Phase, Three Phase To Single Phase conversion Type, High Power Or High Frequency Type With leakage Inductance And Class Of insulation B Or F

Range For Single Phase : 50 VA To 5 KVA (control X'mer), 
5 KVA To 50 KVA (LT X'mer), 10KVA To 100 KVA (PolyPhase X'mer) 

Range For Three Phase : 10 KVA To 1000 KVA


Type : Dry Type VPI : Resin Cast : Oil Cooled

Product Details: